Planar Systems UR9850 Manuale Utente Scaricare il pdf (Pagina 128)

Symptoms, Possible Causes and Solutions

Planar UltraRes User Manual 120

Symptoms, Possible Causes and Solutions

Below are different symptoms that you might encounter as you install your UltraRes

display. First look at the different symptoms to see if you can find your issue. And

then look at the possible cause and try the suggested solution(s). If you still are not

able to resolve your issue, please contact Planar’s Technical Support Department.

Symptom: Can’t Get PC to Output 4K @ 24/30Hz

Possible Cause

Your graphics card may not support a 4K output.

Solution

Make sure that your graphics card can support a 4K output. See "Supported Graphics

Cards" on page 13 for a list of the current graphics cards that Planar supports for the

UltraRes display.

Solution

Confirm that you are using a DisplayPort output. You can’t use a DisplayPort-to-HDMI

adapter to output 4K content.

Solution

Make sure you are using a high-speed HDMI cable. Standard HDMI cables might work

but are not guaranteed.

Solution

Verify that the selected

EDID Type radio button in the UltraRes Control software is 4K

Preferred. If you change the EDID setting, you may need to disconnect and

reconnect the cable.

Note: You can also change the EDID Type setting on the Advanced Setup page of the

Remote Monitoring software.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 134 135 136

Nessun commento

Planar Systems UR9850 Manuale Utente Pagina 128